2020 Ford Mustang Shelby GT500 – Supercharged 5.2L V8, Extensive Performance Upgrades

This 2020 Ford Mustang Shelby GT500 is finished in Oxford White over an Ebony interior and shows 5,947 miles. Powered by a hand-built 5.2-liter supercharged Predator V8 paired with a seven-speed automatic transmission and rear-wheel drive, the GT500 delivers exceptional factory performance, further enhanced by an extensive list of aftermarket engine, cooling, exhaust, wheel, and suspension upgrades.

Highlights include a Griptec ZPE 2.45-inch supercharger pulley, ported supercharger intake runner, VMP Performance 105mm throttle body, Injector Dynamics fuel injectors, a PWR North America intercooler core, American Racing long-tube headers and exhaust components, 20-inch Signature Wheels, Steeda lowering springs, and an Anderson Composites carbon-fiber hood. Additional features include a MagneRide damping system, Torsen limited-slip differential, Brembo brakes, Recaro front seats, and SYNC 3 infotainment.

The vehicle's Carfax report indicates no accidents or mileage discrepancies and shows registration in Florida from new. The seller reports that the exterior and wheels have been ceramic coated. Known imperfections include a chip on the passenger-side air dam beneath the air intake and corrosion on the supercharger pulley hardware.

Performance and Powertrain

5.2L Supercharged Predator V8: The hand-built 5.2-liter supercharged V8 was rated by Ford at 760 horsepower and 625 lb-ft of torque in factory configuration. The extensive engine and supporting-system modifications may increase output, although no dyno sheet has been provided to verify the current horsepower or torque figures.

Seven-Speed Automatic Transmission: Power is delivered to the rear wheels through a seven-speed automatic transmission, providing rapid gear changes and performance-oriented operation.

Rear-Wheel Drive: The rear-wheel-drive layout delivers the traditional Mustang performance experience, supported by a Torsen limited-slip differential with a 3.73 final drive ratio.

Performance Chassis: Factory equipment includes a MagneRide damping system, an engine oil cooler, a transmission oil cooler, and launch control with line lock.

Factory Equipment and Interior

GT500-Specific Bodywork: The Shelby features model-specific exterior styling, including a GT500 body kit, HID headlights, and LED taillights.

Recaro Front Seats: The cabin is trimmed in Ebony and equipped with Recaro front seats designed to provide support during spirited driving.

SYNC 3 Infotainment: The factory infotainment system includes an 8-inch touchscreen, complemented by a rear-view camera.

Dual-Zone Automatic Climate Control: The climate-control system allows separate temperature settings for the driver and front passenger.

Dash-Mounted Chassis Plaque: A GT500-specific chassis plaque adds a distinctive model detail to the interior.

Engine and Forced-Induction Modifications

Griptec ZPE Supercharger Pulley: An upgraded 2.45-inch Griptec ZPE supercharger pulley is among the key modifications to the factory forced-induction system.

Ported Supercharger Intake Runner: The supercharger intake runner has been ported as part of the engine's airflow upgrades.

VMP Performance 105mm Throttle Body: An enlarged VMP Performance throttle body, port-matched to the supercharger, supports the modified intake system.

JLT Performance Cold Air Intake: An aftermarket JLT Performance cold air intake replaces the factory intake components.

Injector Dynamics Fuel Injectors: Injector Dynamics ID1300x2 fuel injectors are installed alongside an aftermarket billet fuel rail and a JMS FuelMAX fuel-pump voltage booster.

Upgraded Belt Drive: Supporting components include a Coastal adjustable billet auxiliary idler, an aftermarket heavy-duty billet belt tensioner, and a Gates heavy-duty supercharger belt.

Upgraded Intercooling System: The cooling upgrades include a PWR North America intercooler core with an 81mm inlet, an aftermarket billet intercooler manifold, and a Meziere Enterprises auxiliary intercooler pump.

Additional Cooling Components: The modifications also include an SPE Motorsport 180-degree thermostat, an aftermarket three-gallon ice tank installed in the factory battery location, and an aftermarket aluminum radiator with billet hold-downs.

Engine Support Components: Additional equipment includes NGK iridium spark plugs and a JLT Performance oil catch can.

Exhaust System

American Racing Long-Tube Headers: The exhaust system has been upgraded with American Racing 1 7/8-inch long-tube headers.

American Racing Exhaust Components: The system also includes an American Racing X-pipe, catalytic converters, and resonators.

Wheels and Suspension

20-Inch Signature Wheels: The Mustang rides on aftermarket 20-inch Signature Wheels, providing an upgraded appearance.

Steeda Lowering Springs: Steeda dual-rate Ultimate Handling lowering springs have been installed. Service documentation indicates that the springs were fitted in May 2023, followed by a four-wheel alignment.

Rear Suspension Reinforcement: KellTrac Innovations Posi-Loc rear suspension subframe reinforcement is fitted to support the modified rear suspension setup.

Adjustable Alignment Components: The suspension modifications include BMR Suspension adjustable camber arms, BMR camber pins, and BMR adjustable toe rods.

Billet Rear Vertical Links: SPE Performance billet rear vertical links complete the list of reported suspension upgrades.

Exterior and Additional Modifications

Anderson Composites Carbon-Fiber Hood: An aftermarket Anderson Composites carbon-fiber hood replaces the factory hood. The original factory hood is included in the sale. The factory hood prop rod has been deleted, and an aftermarket hood prop rod is also included.

Carbon-Fiber Mirror Covers: Carbon-fiber side mirror covers provide an additional exterior accent.

Tinted Windows: The windows have been tinted.

Ceramic Coating: The seller reports that the exterior and wheels have received a ceramic coating.

HP Tuners RTD: An HP Tuners Remote Tuning Device is included among the reported modifications. The vehicle's current tune and calibration details have not been independently verified.

Known Flaws

Passenger-Side Air Dam: A chip is present on the passenger-side air dam beneath the air intake.

Supercharger Pulley Hardware: Corrosion is visible on the supercharger pulley hardware.

Included with the Sale

Two keys
Available parts and service receipts
Original factory hood
Aftermarket hood prop rod
WeatherTech floor mats
HP Tuners Remote Tuning Device (RTD)

Vehicle Specifications

Make: Ford
Model: Mustang Shelby GT500
Model Year: 2020
VIN: 1FA6P8SJ5L5505152
Body Style: Coupe
Exterior Color: Oxford White
Interior Color: Ebony
Engine: 5.2L Supercharged Predator V8
Factory-Rated Output: 760 horsepower and 625 lb-ft of torque
Transmission: Seven-Speed Automatic
Drivetrain: Rear-Wheel Drive
Odometer: 5,947 miles
Wheels: 20-Inch Signature Wheels